VLP6300

download

SENZAR VLP6300 High power sound system 6.3 kW

Vertical Array Bi-Amp loudspeaker LP36

Cabinet: Hi power 3x6“Mid+2.5” Hi Bi-Amp loudspeaker,

Frequency Range (-6 dB): 110 Hz÷20000 Hz

Mid-range max. SPL 1 m / calc: 130 dB

Hi-range max. SPL 1 m / calc: 131.5 dB (Wave Guide/Tractrix horn loaded)

Nominal coverage angle (H/V): 120° x 16°

Transducer Mid Range: 6NMB200V7 (Diameter 6.5")

Transducer Hi Range: ND3662V (2.5” Diaphragm, 1.4" Throat diameter)

Net Weight: 16.5 kg

Dimensions (W / H / D): 194 / 736 / 285 mm

Powered subwoofer VB15A

Cabinet: Powered Subwoofer 1 x 15“multichannel laminarbass reﬂex design

Ampliﬁer: 3-channel D class amp (1x2000w/8 Ohm; 2x1000w/4 Ohm). Power supply with PFC and powerful DSP engine, EQ (IIR/FIR), time alignment, limiting and speakers overload protection.

DSP: Analog Devices DSP engine: Sampling rate – 48kHz, DAC/ADC –24-bit, internal processing – 56 bit. DSP accurately handles audio signal thanks to its functions of equalization, filtering, delay, limiter and protection. Technology of FIR filters made possible to create speakers with high linear phase and amplitude response.

Ampliﬁer Power (RMS): 1 channel x 2000 W/8 Ohm; 2 channel x1000 W/4 Ohm

Ampliﬁer Output TOP speaker: Mid – 1000 W/4 Ohm, Hi - 150 W/16 Ohm

Ampliﬁer Output SUB speaker: Sub – 2000 W/8 Ohm

Signal/Noise-Ratio power ampliﬁer: Stereo mode – 100 dB Mono mode -105 dB(A-weighted)

Presets: 9 stereo presets, 9 mono presets

Subwoofer max. SPL 1 m / calc [2π]: 134 dB

Frequency Range (-10 dB): 40 Hz÷190 Hz

Sub Transducer: 15NLC60V-Al36 (Diameter 15")

Power Requirement: 100 to 250 V AC, 50 to 60 Hz

Net Weight: 30.8 kg

Dimensions (W / H / D): 430 / 560 / 550 mm

- 2 x STS46 Speaker stand (M20) for 35 mm flange (glass)

- 2 x Angle ST 0-15 tilt adapter

Attention!

To tilt the LP46 column vertically, use the tilt angle adapter SENZAR AngleST 0-15